How much ink do i have left

The Epson printer bases its low-ink message on the printing capacity of the OEM cartridge, but since the LD cartridge contains considerably more ink than the OEM version, it is bound to have more ink remaining when the printer shuts down, according to Chafetz.

In other words, if Epson supplies enough ink in its cartridge for pages plus a margin of error, say, while LD adds enough ink to print pages, and if the Epson printer shuts off at pages anyway, the percentage of leftover ink in the LD cartridge will be considerably higher than in the Epson cartridge.

Chafetz points out that regardless of the percentage of unused and unusable ink in the nominally empty cartridges, the page yields of the LD Products cartridges and the high-capacity Epson cartridges should be the same. With an OEM cartridge installed, the printer displayed warning messages as the ink level dropped, but it never forced us to replace the cartridge. As a result, we continued printing until the pages began showing telltale signs of low ink, such as banded text.

When using an aftermarket cartridge from LD Products, the C failed to post any low-ink warnings—either on our test computer or on the printer console. Equipped with a Kodak cartridge, this printer shut down with 43 percent of the ink remaining. Its full quantity of ink weighed The leftover ink weighed 5. Kodak chose not to comment on the aftermarket results.

Some vendors and analysts advise consumers to make sure that they get the correct page yield the total number of pages produced with a single cartridge , rather than focusing on the amount of ink left unused in a cartridge that must be discarded. Specifically, Epson printed just pages, far less than the pages the company estimated it would produce; and Kodak generated pages versus a projected page count of Cheap Third-Party Ink. Page yields aside, we have yet to hear a satisfactory and persuasive explanation from a vendor as to why so many printer cartridges leave so much ink behind.

Even if the waste amount is only a few milliliters, that unused liquid could have printed a lot of pages. Watch the Page Yield Some vendors and analysts advise consumers to make sure that they get the correct page yield the total number of pages produced with a single cartridge , rather than focusing on the amount of ink left unused in a cartridge that must be discarded. Mac users will find it in their Library under the Printers folder.

Once you launch the Canon Status Monitor, click on the maintenance tab, which opens the printer status screen. A pop-up screen will display ink levels and toner levels. You can check the ink levels on older Brother printers by pressing the OK button three times. This will print the Printer Settings pages. The remaining toner percentages should be listed on page two.

When the toner in the toner cartridge is low, the printer will display a "Replace Toner" message. If the "Replace Toner" message appears, you will be unable to print out the Printer Settings pages.

In this case, you can check the remaining toner levels using the control panel. After this you will see 10 boxes on the control panel. The number of black boxes will decrease as the toner is used correlating with the remaining toner left in the toner cartridge. On a Mac , you can check the ink and toner levels on your OKI printer by following the steps below. Use the Lexmark P series utility which will allow you to check the ink and toner levels on your Lexmark printer from your computer screen.

While most Lexmark printer drivers are compatible with Windows and Mac operating systems, the Lexmark P series utility can also be an asset when checking the ink and toner levels on your Lexmark printer. If your Ricoh printer is connected to Windows, you could use the usual print properties method to display your toner or ink level status.

For this, you need to click on the main page to display system information which will display your toner levels. Mac users can see printer ink levels in the System Preferences under Printers and Scanners:. Modern Sharp printers display the ink levels right on the front home screen.

To check the levels on older Sharp printers, use one of the following methods. Hold down the blue house button on the main menu until the toner levels and meter reading is displayed. Tap the toner remaining tab and the device will display your current toner level. Hold down the copy tab on the top left of the home screen until the toner levels and meter reading show tab MFP status and then tap the toner remaining tab to display your current toner level.

Choose View Devices and Printers and select your printer. Click the Services tab, and select Dell ink levels. This page allows you to check the ink and toner levels on your Dell printer as well as print a test page. Above we described how to check how much ink is left in a printer on different platforms and devices.

But there are additional questions that frequently arise among printer owners which we will try to answer below. Epson suggests making sure the ink cartridges are properly installed.

You can also try removing and reinstalling the ink cartridges. In some cases this may resolve the issue. HP printer owners report this is a common problem when using non-HP brand ink cartridges. One way to solve this problem is by resetting your printer. Welcome to the wonderful world of HP, where you need all four colors of ink to print a black-and-white document! HP uses a small amount of colored ink every time it prints a page in order to keep the print heads from clogging.

Save it to your bookmarks in order to find this information easily anytime you need it! When it comes to Epson, there is only one way to check the ink levels, which is with the help of the original Epson software on your PC. Unfortunately, the manufacturer does not provide the same option built in the printer itself.

When purchasing an Epson printer, make sure you get a CD with a proper printer driver. It is important to install the suitable software to perform basic operations as well as check printer ink levels on Epson.

There you will see the approximate ink levels visualized in a simple graph. Thanks for sharing such great information with us. Your Post is beneficial and the information is reliable for new readers. Thanks again for sharing such a useful post. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Something went wrong. Try again! Please, enter your email address. Thank you for your response!

Enter your email address to subscribe now! You can also unsubscribe at anytime. Log in. SmartInk blog. April 9, Posted by tsosnovska. ControlCenter4 Home mode. ControlCenter4 Advanced mode.