How do fencing pliers work

Splice wire together to attach pieces for longer lengths of wire. Fasten wire ties with fencing pliers by wrapping around the post and placing each wire tie end around the fencing.

The jaws allow squeezing wire tightly to wrap in a circular motion around the fencing to ensure stability. Stretch barbed wire by firmly gripping the wire and turning the wire in a twisting motion, which will pull the wire into a loop that you turn in one direction to tighten with each turn.

Older fences or fences that have damage from falling trees will loosen and sag. Fencing pliers can tighten all of these areas. Fencing pliers are a unique tool, often used to erect fences because of their multifaceted abilities. Fencing pliers may differ based on the manufacturer, but most sets come with a standard set of features.

Fencing pliers are ideal for when you need to accomplish multiple tasks within a short time without wanting to carry cumbersome tools with you to perform the same job. While fencing pliers are popular for post and fence installation, you can use them for almost any fencing job. Sometimes, you may only need fencing pliers for a specific part of a job, but then you can put them away until later.

The appeal of fencing pliers is that the tool can cut, pull, hammer, twist, stretch, and crimp — all in one compact package perfect for a pants pocket. The primary jobs of fencing pliers are obviously all related to cutting fencing, hammering posts, and so on. One of the key parts of fencing is securing the fence, and fencing pliers help do this by driving staples into wooden fence posts.

You can do this by simply placing a fence staple onto a piece of field fence, chicken wire, barbed wire, or cattle panel and hammering the staple until the piece of fence is securely fastened to the post. Nails are also popular in fence construction, and those have to be hammered in. The same side used for driving staples is also used here and works pretty well as long as you have softwood posts.

For hardwood posts, you may need something more heavy-duty, like a dedicated hammer or nail gun. A major part of constructing fences involves cutting off sections of the fence, something normally possible with tools like metal snips or wire cutters.

Still, fencing pliers excel in this particular task. Fencing pliers are designed to provide every function necessary for erecting or repairing a fence. The different categories below will enable shoppers to select the best fencing pliers for their particular needs.

The hammer face is grooved for positive contact, and the claw is thin enough to dig into embedded staples and strong enough to resist damage.

The ergonomic ProTouch handles provide excellent grip and good comfort. The tool is competitively priced. These basic pliers are imported from China. While these may not be made to the highest standards, these budget-friendly fencing pliers offer everything the DIY enthusiast needs in home fencing. In fact, drop-forged steel is a hard-wearing material often found on more expensive tools. The cushioned grips provide good hand comfort, and the handle design delivers excellent cutting power and leverage.

However, the pincer section is blunt and might struggle to remove small staples. At first glance, it can be difficult to tell the difference between cheap fencing pliers and more expensive models. Their overall appearance is very similar, and most share the same features. The plastic-coated handles provide a good grip. The claw is not quite as sharp as it could be, and the pincer area is a little small. Nevertheless, these are functional, affordable fencing pliers and a good choice for occasional repairs and maintenance.

Slender-looking handles maximize grip when tensioning, twisting, or cutting wire, while rubberized sleeves provide a secure hold. The cutters are different sizes to accommodate various wire thicknesses. The central portion can double as a staple starter. However, the claw could be sharper, and the pliers themselves will eventually show signs of rust. However, an occasional wipe with light machine oil should help keep corrosion at bay.

These are fencing pliers. The hammer head is used for knocking in staples to hold fencing wire to a post. They're wire cutters for different gauges of wire, open the handles,put the wire to be cut in the slot and then squeeze. The spike can be driven under an old staple and then used to loosen it and then lever it out.

How do you tie a chain link fence? Bend one end of an aluminum tie wire into a hook and grab the bottom strand of the opening above the rail. Loop the tie wire around the top rail, pull it firmly and tie it back onto the mesh.