How does flv blaster work

This is fine, and will generally maintain consistent audio level to VidBlaster. Bringing Skype into the Picture: It is very easy to have a Skype caller become part of your live webcast.

Skype callers can be captured live as a camera source. Simply add a new Camera Module:. The result will be a new camera module with no designated input. Click on the Camera select tab, and select Screen Capture. Now open Skype, and connect to someone you want to bring into your live webcast. Make sure that person your connecting to have enabled their video camera in Skype. After establishing the connection, go back to the VidBlaster program, and you will see the video from the caller on the right hand upper area of the VidBlaster screen.

Note: make sure to leave some empty space on the screen, and if needed move modules out of the area where the Skype video comes up:.

Then put the cursor at the top left part of the Skype video, and while holding the mouse button, drag down the cursor, and you will see the outline of the capture. Follow the contour of the Skype video until you get to the bottom, then release. Click on the Camera 2 Module, and the Skype caller will appear directly in the live Webcast. This is a good time to check out the Video Effects Module, to create a PIP or Side-by-Side video effect, which will show both the local users camera and the Skype participant in one stream.

Add titling, graphics, and a background, to create a network TV like experience for your webcast. A word about audio for Skype: The Skype audio from the caller, will be routed to the computers audio output. Best practice for mixing Skype audio with local audio is to connect the audio output of the computer to an audio mixer. It does not have to be an expensive mixer, but one that will take the audio from the computer and mix in the local audio from a microphone or other audio device.

The output of the mixer can then be re-inserted into the computers audio input or audio capture card. This will enable control of the Skype audio level and the local microphone level for a good broadcast-streaming experience.

Add Effects to your live Webcast: To have two or more cameras appear together in the live webcast, use the Effects Module. Then select a source for the full screen left tab , and a source for the inserted Picture right tab :. You can change the type of effect in real-time, live while webcasting, or in true broadcast fashion.

Select a full camera shot, change the effect, and then click on the effect module to show the new effect. You can reposition the inserted picture anywhere in the video effects module, and resize the inserted picture to any aspect, width, or height desired.

For Skype callers, a typical video effect is the Side-by-Side effect, which will make the Skype caller appear much like you find in a professional network newscast:. In professional studio operations, broadcasters have two main screens, a Program Monitor, and a Preview Monitor.

They also have multiple smaller monitors which are used to see live views of all the camera and graphics sources.

They then use a switcher to select which scene, effects titles, graphics or pre-recorded video goes to air. VidBlaster provides all of this functionality on screen with a Program Monitor, Preview Monitor, Switcher, and all video sources, in a Multi-viewer configuration:.

The size of the Program and Preview Display is entirely up to you, and based on you actual available computer screen size, and the chosen video resolution.

Notice also that display size ratios are available as 16 x 9 or 4 x 3. A typical configuration is to have the Program and Preview Monitor next to each other towards the top of the computer screen. The Video Switcher will then appear, and can be moved to any desired area of the computer screen:.

When you click any source on the top row of the Video Switcher, the selected input will go directly to the live stream. When you click a source on the bottom row, that source will appear in the Preview Monitor, and will be ready to take as either a straight hard cut or a dissolve. To change the transition type to a dissolve, click the Transition pull-down tab and select Dissolve:. When you click Trans button on the Switcher Module, the transition will be performed.

Whatever source was on the Preview Module will fade in, and appear in the Program Monitor as the live stream picture, and the former Program source will fade out, and appear in the Preview Monitor:. As you add more Modules to your VidBlaster application, the switcher will increase in size horizontally, to accommodate more switcher buttons.

The switcher also has a Cut button, which will do a quick switch between Program and Preview sources. If there is no one available to switch cameras, in a live webcast, the Auto switching option can be selected, with a preset interval defined in seconds:.

Then simply click the small box under each camera that you desire to auto switch and VidBlaster will automatically switch the live cameras, or any other source that you have selected:. To exit the Auto mode, click the pull-down to the right of the seconds interval, and select off, the switcher will return to normal manual operation: the switcher will return to normal manual operation:.

You can use one of the two or add additional Player Modules. Working with the Player 1 Module, right click on the module, and select Open:. The selected video will appear in the player, and can be switched and played into the live webcast. The Record Module The Record Module allows the user to record or archive their live stream as a video file.

The Recorder can be started or stopped anytime, and does not require that the live stream be started. Naturally you can live stream and record at the same time, or separately, as needed. Simply click the Record Button when you want to record the Program video:. The red light come on, at the upper left of the module, and the time counter will increase.

This is based on your available free hard drive space. When done recording, click Stop. Then, to archive the recording, Click Save. Click Save again, and your file will be archived in the format you choose. There are some options for the Record Module. As most users are looking to upload to their videos to the web, the default recording mode is compressed.

However, you can change the recording mode to Uncompressed. Another option is the ability to change the directory for the temporary video storage during recording:.

After your recorded file has been rendered, you can immediately upload your file to your Video-On-Demand service provider, or one of the free services, such as YouTube. You can also bring the recorded video files into a Video Player Module, to replay the prerecorded video into a live webcast.

As you can see, potentially unwanted programs are not very bad, but still they are rather suspicious. FLV Blaster is no exception. Have you already detected this program on your computer? If so, you should know that other unreliable programs might have been installed on your computer too.

Nobody knows which programs travel in a bundle with FLV Blaster, but we believe that you might have installed adware or other potentially unwanted programs on your PC. If you ever detect an unknown program, find out what it does, and then erase it if it turns out that it is unreliable. Suspicious software might enter your system in the future too. If you do not want to encounter it, you have to install a security tool on your PC and start surfing the Internet more cautiously.

You should not keep FLV Blaster installed when there are hundreds of other similar programs out there. Luckily, it is not so difficult to get rid of this potentially unwanted program. Specialists working at anti-spyware Of course, you can erase this program manually as well. It is extremely important to have a security tool installed on the system if you want to prevent programs similar to FLV Blaster from entering the system.

We recommend using the SpyHunter antimalware tool whose free version can be downloaded from our website. Website URL. I am very interested in the media industry, and have been involved in it for a number of years, and, with time passing by, I have grown my skills as a real wordsmith in this respectable company.

Some say that I am a talented writer, with a flair for capturing the essence of a moment, be it in the realm of print or online media, and I am convinced that one can only reach excellence through words. Lately, I have caught the interest in analyzing and breaking down all things computer security related, and my goal is to bring this information to the public in a way that even the most inexperienced computer users would understand how to deal with their systems and any arisen problems.

The latest version of Flv Recorder is 4. The most prevalent version is 4. Flv Recorder runs on the following operating systems: Windows. The download file has a size of 1. Flv Recorder 4. Download Virus checked. Description Technical Buy Edit. FLVRecorder is the only flash video stream recorder that can record Flash. Your can save flash from all popular flash websites: 1. Fabchannel 8. Imeem and more